10
3. Place ignition switch in “START” position.
4. Move choke lever to OPEN position.
5. If tank is not empty, pull starter handle.
6. If fuel tank is empty, after refilling, push the purge
bulb (until fuel is visible in clear fuel return line). Pull
starter handle.
NOTE
If engine does not starting after four pulls, use cold
starting procedure.
Ignition switch
START
Throttle trigger
Throttle trigger lockout
STARTING WARM ENGINE
Starter handle
(
“ES” START
)
Brake lever
Releasing brake
Brake lever
Activating brake
(After starting engine, release brake before
commencing to use the unit.)
7. Put fingers on the right side of brake lever.
8. Return lever in the arrow direction until it clicks.
The brake is released this way.
• Activate brake before starting engine.
1. Put fingers on the left side of brake lever.
2. Pull lever in the arrow direction until it clicks.
(Even when the engine revolution rises after engine
start, cutter blade does not move.)
Depress throttle trigger lockout and gradually squeeze
throttle trigger.
Brake lever
Releasing brake
(
After starting engine, release brake before
commencing to use the unit.)
9. Put fingers on the right side of brake lever.
10. Return lever in the arrow direction until it clicks.
The brake is released this way.
