background image

H

EDGE

 C

LIPPER

O

PERATOR

'

S

 M

ANUAL

3

INTERNATIONAL

 

SYMBOLS

S

AFETY

MANUAL

 

SAFETY

 

SYMBOLS

 

AND

 

IMPORTANT

 

INFORMATION

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Hot

Surface

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Read and understand

owners manual.

Wear eyes, ears and

head protection

Emergency stop

Fuel and oil mixture

Finger Severing

Carburetor   adjustment

- Low speed mixture

Safety/Alert

Avoid all power

lines. This unit is not

insulated against

electrical current.

Do not operate clos-

er than 15 M (50 ft.)

from electrical haz-

ards.

Plan retreat path

from falling

objects.

Wear hand protec-

tion. Use two handed.

DO NOT smoke

near fuel.

DO NOT allow

flames or sparks

near fuel.

Wear slip resistant

foot wear.

Ignition

Ignition

ON/OFF

Do not operate
without guards

in place.

Keep bystanders at least

4.5 meters (15 feet) away.

Primer bulb

Choke Control

"Cold Start"

Position

(Choke Closed)

Choke Control

"Run"

Position

(Choke Open)

   WARNING

The safety alert symbol accompanied by the word

“WARNING” calls attention to an act or condition

which CAN lead to serious personal injury or death

if not avoided.

CIRCLE AND SLASH SYMBOL

This symbol means the specific action
shown is prohibited. Ignoring these
prohibitions can result in serious or fatal
injury.

   CAUTION

The safety alert symbol accompanied by the word

“CAUTION” calls attention to an act or condition

which may lead to minor or moderate personal injury

if not avoided.

NOTE

This enclosed message provides tips for use, care
and maintenance of the unit.

IMPORTANT

The enclosed message provides information
necessary for the protection of the unit.

   DANGER

The safety alert symbol accompanied by the word

“DANGER” calls attention to an act or condition

which WILL lead to serious personal injury or death

if not avoided.

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages
preceded by symbols or key words.  The following is an explanation of those symbols and key words and what they
mean to you.

Summary of Contents for HC-151





























Reviews: