background image

4

Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are 

not followed.  Proper clothing and safety gear must be worn when operating unit. 

personal

 

condItIon

 

and

 

safety

 

equIpment

  

  WARNING

Physical Condition 

Your judgment and physical dexterity may not be good:                        

• if you are tired or sick,                       

•  if you are taking medication, 

•  if you have taken alcohol or drugs.

Operate unit only if you are physically and mentally well.

Eye Protection 

Wear eye protection that meets ANSI Z87.1 or CE re-

quirements whenever you operate the unit.

Hand Protection

Wear no-slip, heavy-duty work gloves to improve your 

grip on the handle.  Gloves also reduce the transmission 

of machine vibration to your hands.

Hearing Protection

ECHO recommends wearing hearing protection whenever 

unit is used.      

Extended Operation/Extreme Conditions

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be 

brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensa-

tions, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, 

because the minimum exposure, which might trigger the ailment, is unknown. 

•  Keep your body warm, especially the head, neck, feet, ankles, 

hands, and wrists.

•  Maintain good blood circulation by performing vigorous arm exer

-

cises during frequent work breaks, and also by not smoking.

•  Limit the hours of operation. Try to fill each day with jobs where 

operating the unit or other hand-held power equipment is not 

required.

•  If you experience discomfort, redness, and swelling of the fingers 

followed by whitening and loss of feeling, consult your physician 

before further exposing yourself to cold and vibration.

Proper Clothing 

Wear snug fitting, durable clothing;

•  Pants should have long legs, shirts with long sleeves.

•  DO NOT WEAR SHORTS,

•  DO NOT WEAR TIES, SCARFS, JEWELRY.

Wear protective hair covering to contain long hair.                                                     

Wear sturdy work shoes with nonskid soles;

•  DO NOT WEAR OPEN TOED SHOES,

•  DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain 

hair with cap or net.

Hot Humid Weather

Heavy protective clothing can increase operator fatigue 

which may lead to heat stroke. Schedule heavy work for 

early morning or late afternoon hours when temperatures 

are cooler.

Summary of Contents for HC-150 - 11-09 1

































Reviews: