A
1
D
ESCRIPTION
Page 7
CONTENTS
____ 1 - Trimmer Assembly
____
- Power Head
____
- Drive Shaft Assembly
____ 1 - Plastic Bag (Co-Pack)
____
- Rapid Loader 2-line Head
____
- Operator's Manual
99922203524
12/01
SUP22203524
SUPPLEMENT TO OPERATOR'S MANUAL
PART NUMBER X7702273900 (X770000370)
FOR MODEL: GT-2000EZR S/N 03001001 & UP
Please use this Operator Manual Supplement when
assembling and maintaining your GT-2000EZR.
____
- Safety Manual
____
- Shield Assembly
____
- Hardware Bag
____
-Line Head Mount
____
-1, 3/8-24 Locknut
____
-1, Small Washer
____
-1, Large Washer
____
-12, 8 in. X .080 Pre-cut Nylon Line
____
- Locking Tool
____
- Warranty Card & Limited Warranty
____
- Safety Glasses
____
- Oil 2 Stroke
A
SSEMBLY
- Page 10
PLASTIC
SHIELD
Tools Required: None
1.
Remove wing nut (C), washer (B), and bolt (A).
2.
Snap the shield over the bearing housing.
3.
Install bolt (A), washer (B) and wing nut (C).
EMISSION
CONTROL
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY : 2EHXS.0214RA DISPLACEMENT : 21.2cc
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PHASE 2 EMISSION
REGULATIONS FOR SMALL NONROAD ENGINES. REFER
TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICA-
TIONS AND ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by
the manufacturer certifying the engine emissions output meets applicable
California and/or U.S. EPA emissions regulations, provided that approved
maintenance procedures are followed as listed in the Maintenance Section of
this manual.
NYLON
LINE
HEAD
Tools Required: Head Locking Tool, 9/16 in. Socket
Parts Required: Rapid Loader
TM
Head.
1.
Remove plastic threaded shaft sleeve from PTO shaft.
2.
Align locating hole in upper plate with hole in bearing housing and insert 1/8 in.
diameter locking tool (A).
3.
Place large washer then line head on threaded shaft followed by small metal washer
and locknut.
4.
Tighten locknut securely.
IMPORTANT
Remember to remove the locking tool.
Summary of Contents for GT-2000EZR
Page 2: ......
