PAD18 0-10V Dimmer
Action Button
(Power/Include/Exclude)
PAD18 is a 0-10V dimmer.
This device is a security enabled Z-Wave Plus™ product. The
encrypted Z-Wave Plus™ messages support PAD18 to
communicate with other Z-Wave Plus™ products.
PAD18 can be used with Z-Wave™ devices (with Z-Wave™ logo)
from different manufacturers, it can also be included in the Z-
Wave™ networks from different manufacturers.
All mains operated nodes (even from different manufacturers) in
the network act as repeaters to increase the stability and reliability
of the Z-Wave™ network.
The product is supported with Over-the-Air (OTA) feature for
firmware upgrade.
Specification
Rating
Rating: 12-24VDC, Max. 70mA.
In +
Sensor: 0-10VDC
Push-button, Switch
Potentiometers 100K
Out +
0-10VDC for controller load
RF distance
Min. 40M indoor,
100M outdoor line of sight,
RF Frequency
868.4MH, 869.85MHz (EU)
922.5MHz, 923.9MHz, 926.3MHz (JP)
920.9MHz, 921.7MHz, 923.1MHz
(TW/KR/Thai/SG)
Transceiver
RF Maximum Power (Peak)
+10dBm (Peak)
RF Maximum Power (Average)
-10dBm (Average)
Dimension
125mm(D) X 35mm (H)
Weight
140g
IP classification
IP20; indoor use
Operation temperature
-10 to 40° C
Humidity
85%RH max
FCC ID
RHHPAD18
Marking
CE/NCC
Specifications are subject to change and improvement
without notice.
Troubleshooting
Symptom
Cause of Failure
Recommendation
The device can not join to
Z-Wave™ network
The device may in a Z-
Wave™ network.
Exclude the device then
include again.
1
