![background image](http://html.mh-extra.com/html/echo/es-2100esl/es-2100esl_operators-manual_532440014.webp)
14
REPLACING FUEL FILTER
NOTE
A clogged fuel filter will cause hard starting or poor engine
performance.
1. Pick up the fuel filter through fuel tank opening with a
piece of steel wire or the like.
2. Remove old filter from fuel line.
3. Install new fuel filter.
NOTE
Keep fuel tank clean - do not allow dirt or debris to enter
fuel tank.
PROCESSING DEVICE
WARNING DANGER
NEVER REMOVE VACUUM TUBE OR OPEN
FAN GUARD WHEN SHRED-N-VAC™ IS RUN-
NING.
1. With engine stopped, remove spark plug wire, loosen
clamp and pull vacuum tube from unit.
2. Remove accumulated debris from processing device and
inspect for damage.
NOTE
Do not operate SHRED-N-VAC™ if processing device is
damaged, loose or broken.
3. Refer to "Installing Vacuum Tube'' in assembly section
for correct reassembling procedures.
VACUUM BAG
Shake dust from bag and inspect for holes or tears.
Inspect zipper and clean debris from teeth to assure com-
plete closing of zipper.