Echo DHC-200, Operator'S Manual

Page: 24 / 144

22
Maintenance and care
Troubleshooting table
Trouble Cause Solution
Red Charger light flashes or does not light up ΠPlug not connected to power
outlet ΠPlug in the charger
ΠBattery pack not installed prop-
erly ΠCheck the battery pack installation
ΠObstructed connection ΠReinstall battery pack again after
removing obstructions from con-
nection
Œ
Fault in the charger
Œ
Consult your ECHO dealer
ΠFault in the battery pack ΠConsult your ECHO dealer
Unit will not turn on
Œ
Battery pack not installed prop-
erly
Œ
Check the battery pack installation
Unit does not run when turned on
Œ
Battery pack discharged
Œ
Charge the battery pack
ΠBlades obstructed ΠTurn off the unit remove battery
and clean obstruction from blades
ΠBattery pack outside accepta-
ble temperature range ΠRemove the battery pack and al-
low to cool
ΠSeized blades ΠBrush loose debris from blades
and lubricate
Running time is too short ΠBattery pack outside accepta-
ble temperature range ΠRemove the battery pack and al-
low to cool
ΠUnit electronics too hot ΠTurn unit off and allow to cool
Œ
Battery pack discharged
Œ
Charge the battery pack
ΠDamaged blades ΠConsult your ECHO dealer
Unit vibrates excessively
Œ
Fault in internal parts
Œ
Consult your ECHO dealer
ΠChecking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
ΠConsult your dealer in the event of a problem that is not covered in the table above, or other such concerns.
Œ
For spare parts and consumables, please use only genuine parts and designated products and components. Using parts from
other manufacturers or non-designated components may result in a malfunction.