background image

3

CS-8000 TYPE1-E

   WARNING

The safety alert symbol accompanied by 
the word “WARNING” calls attention to an 
act or condition which CAN lead to serious 
personal injury or death if not avoided.

   CAUTION

The safety alert symbol accompanied by 
the word “CAUTION” calls attention to an 
act or condition which may lead to minor or 
moderate personal injury if not avoided.

NOTICE

This enclosed message provides tips for use, 
care and maintenance of the unit.

IMPORTANT

The enclosed message provides information 
necessary for the protection of the unit.

   DANGER

The safety alert symbol accompanied by 
the word “DANGER” calls attention to an 
act or condition which WILL lead to serious 
personal injury or death if not avoided.

SYMBOLS AND SIGNS

CONTENTS

RULES FOR SAFE OPERATION ............................................................................    1
SYMBOLS AND SIGNS ...........................................................................................   3
PACKING LIST .........................................................................................................   5
NOMENCLATURE OF PARTS ................................................................................    6
OPERATOR SAFETY ..............................................................................................    8
CORRECT USE OF CHAIN BRAKE ........................................................................    9
PREPARATION FOR USE .......................................................................................   10
FUEL AND LUBRICANT ..........................................................................................   12
EMISSION DATA .....................................................................................................   13
OPERATION ............................................................................................................  14
CUTTING INSTRUCTION ........................................................................................  17
CHAIN AND GUIDE BAR COMBINATION ...............................................................  21
MAINTENANCE AND CARE ....................................................................................  22
SETTING THE SAW CHAIN ....................................................................................  26
TROUBLESHOOTING .............................................................................................  28
STORAGE AFTER USE ...........................................................................................  29
TECHNICAL DATA ...................................................................................................  29
WARRANTY STATEMENTS ....................................................................................  30

This chain saw is designed for cutting wood or wood products.  
Do not cut solid metal, sheet metal, plastic or any non-wood materials.

Specifications, descriptions and illustrative material in this literature are as accurate as 
known at the time of publication, but are subject to change without notice.  
Illustrations may include optional equipment and accessories, and may not include all 
standard equipment. 

CIRCLE AND SLASH SYMBOL

This symbol means the specific action 
shown is prohibited. Ignoring these 
prohibitions can result in serious or 
fatal injury.

Summary of Contents for CS-8000 TYPE1-E



































Reviews: