background image

CS-3410

SAFETY

X7503361801

9

© 10/23 ECHO Incorporated

Hand Protection

Wear sturdy, no-slip, rubber work gloves to improve your grip on the 

handles. Gloves also provide protection against cuts and scratches, cold 

environments, and reduce the transmission of machine vibration to your 

hands.

Hearing and Ear Protection

ECHO recommends wearing personal protective equipment whenever unit 

is used.

Breathing Protection

Operators who are sensitive to dust or other common airborne allergens 

may need to wear a dust mask to prevent inhaling these materials while 

operating unit. Dust masks can provide protection against dust, plant debris, 

and other plant matter such as pollen. Make sure the mask does not impair 

your vision, and replace the mask as needed to prevent air restrictions.

Proper Clothing

Wear snug-fitting, durable clothing:

• Pants should have long legs, shirts should have long sleeves.

• DO NOT WEAR SHORTS.

• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or 

hanging items that could become entangled in moving parts or 

surrounding growth.

• Keep clothing buttoned or zipped, and keep shirt tails tucked in.

• Wear sturdy work shoes with nonskid rubber soles.

• DO NOT WEAR OPEN TOED SHOES.

• DO NOT OPERATE UNIT WITH BARE FEET.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Heavy protective clothing can increase operator fatigue, which may lead to 

heat stroke. Schedule heavy work for early morning or late afternoon hours 

when temperatures are cooler.

Summary of Contents for CS-3410





























































Reviews: