2 INCH CHIPPER/SHREDDER
3
ENGLISH
SAFETY
P/N 12250
DO NOT INSERT
BRANCHES LARGER
THAN 3/4 INCH INTO
SHREDDER OR MA-
CHINE DAMAGE MAY
OCCUR.
P/N 12176
KEEP HANDS AND FEET
OUT OF INLET AND DIS-
CHARGE OPENINGS
WHILE MACHINE IS
OPERATING TO AVOID
SERIOUS PERSONAL
INJURY. STOP AND
ALLOW MACHINE
TO COME TO A COMPLETE STOP BEFORE CLEARING
OBSTRUCTIONS.
P/N 12175
3
1
P/N 14942-00
4
2
P/N 14965-00
ALWAYS STAND CLEAR OF
DISCHARGE AREA WHEN OPERATING
THIS MACHINE. KEEP FACE AND BODY
AWAY FROM FEED AND DISCHARGE
OPENINGS.
WHEN FEEDING SHREDDABLE
MATERIAL INTO CHIPPER, DO NOT
ALLOW METAL, ROCKS, BOTTLES,
CANS OR ANY OTHER FOREIGN
MATERIAL TO BE FED INTO CHIPPER
OR SHREDDER.
DO NOT OPERATE THIS EQUIPMENT
IN THE VICINITY OF BYSTANDERS. DO
NOT ALLOW CHILDREN TO OPERATE
THIS EQUIPMENT.
OBTAIN AND WEAR SAFETY GLASSES
AND USE HEARING PROTECTION AT ALL
TIMES WHEN OPERATING THIS MACHINE.
BEFORE INSPECTING OR SER-
VICING ANY PART OF THIS MA-
CHINE, SHUT OFF POWER SOURCE,
DISCONNECT SPARK PLUG WIRE
FROM SPARK PLUG AND MAKE SURE
ALL MOVING PARTS HAVE COME TO A
COMPLETE STOP.
BEFORE INSPECTING OR SERVICING
ANY PART OF THIS MACHINE, SHUT
OFF POWER SOURCE, DISCONNECT
SPARK PLUG WIRE FROM SPARK PLUG
AND MAKE SURE ALL MOVING PARTS
HAVE COME TO A COMPLETE STOP.
5
1.6 SAFETY DECALS
See Section 1.7 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
CHECK BLADE BOLTS
FOR PROPER TORQUE
AFTER EVERY 8 HOURS
OF OPERATION. CHECK
BLADES AND ROTATE
OR RESHARPEN DAILY
OR AS REQUIRED TO
KEEP BLADES SHARP.
REFER TO OWNERS MANUAL FOR INSTRUCTIONS. FAILURE
TO DO SO MAY CAUSE POOR PERFORMANCE, DAMAGE
OR PERSONAL INJURY AND WILL VOID THE MACHINE
WARRANTY.
READ AND UNDERSTAND YOU OWNERS MANUAL
BEFORE OPERATING. IF OWNERS MANUAL WAS
NOT INCLUDED OR YOU HAVE ANY QUESTIONS,
PLEASE CALL 800.247.7335 OR 701.282.5520
(U.S.A.)
