Echelon STRIDE-7s, Instruction Manual, Page: 25 / 132

25
25
While one person holds the console
up close to the top of the uprights,
the other person should connect the
matching wires from the right upright
to the right side of console.
Once connected, push wires carefully
back into upright.
Insert console halfway into the uprights.
Before inserting completely, make sure
to pull the top wire on both left and
right sides from the console through
the top hole of the upright.
Insert console completely
into uprights.
Making sure holes are aligned, insert Hex Bolt (C) with
Spring Washer (H) . Tighten bolts with Flat Washer (G) and
Allen Wrench (17) . Repeat for left and right uprights.
BE CAREFUL TO NOT CLIP WIRES!
BE CAREFUL TO NOT CLIP WIRES!
1
3
2
4
assembl
y