L
ON
W
ORKS
Router User’s Guide
8-11
Set Input and Non-Priority Output Buffer Queue Count
The buffer queue counts are selected using a
Write Memory
network management
message with the following paramters:
mode
= READ_ONLY_RELATIVE (1)
offset =
0x001C;
count =
1;
form
= BOTH_CS_RECALC (1)
data
=
queue_counts;
The
queue_counts
value contains two nibble fields which control the count of both the
input and non-priority output buffer queues. The least significant nibble controls the
number of input buffers and the most significant nibble controls the number of non-
priority output buffers. The default for this field is 15 non-priority output buffers
(
COUNT_15
) and 2 input buffers (
COUNT_2
). The total number of bytes assigned to the
buffer queues must not exceed 1254 bytes as described under
Message Buffers
in Chapter
2. The queue count for both queues is represented by the source code as that for
Set
Priority Output Buffer Queue Count
above.
Summary of Contents for LONWORKS
Page 34: ......