i
.LON 1000 Internet Server Starter Kit
33
browser to connect to the
i
.
LON 1000
to display web pages
. Get
help from your TCP/IP system administrator
. The administrator is
an expert on TCP/IP and knows how your TCP/IP network
performs. The administrator also will know which values to use
for IP address, subnet mask, etcetera. It is a common mistake to
supply the wrong values. Remember that the values shown in
Chapter 2 are to illustrate syntax only. Your network will require
different values.
d)
Reset the
i
.
LON 1000
’s IP address, subnet mask, FTP user name and
password, and the default gateway by typing the following commands at the
i
.
LON 1000
’s console prompt. Your TCP/IP network administrator will
know the proper values to use with each command.
ipaddress n.n.n.n
subnetmask n.n.n.n
gateway n.n.n.n
ftpuser user1
ftppassword gh5bug
e)
Verify that you can ping the
i
.
LON 1000
from your PC, and that you can
ping the PC from the
i
.
LON 1000
’s console prompt. Again, your TCP/IP
network administrator can help you do this.
2
Work from the solution network. This nework represents the state of your
project through step 4k in Chapter 2. The devices, functional blocks, network
variables, and connections are all properly defined in this network.
a)
Start the LonMaker tool and restore the backup file named
Web
solution.zip
. Although the LonMaker tool will prompt you to re-
commission all the devices in the drawing, it is not necessary to do so at
this time.
