8
FOLDING UNIT
1. Lay unit on right side as shown in Fig. 1 below.
2. Unhook Short Band from Front Frame and Long Band from Rear Frame.
Leave both Bands connected to Seat Support Frame for storage (fig. 1a).
3. Push the Back toward the Seat until it aligns with Front Frame (fig. 1b).
4. Remove Locking Arm Knob from Rear Frame (fig. 1c).
5. Rotate Locking Arm toward Front Frame and re-install Locking Arm Knob
for storage.
6. Grasp Front Frame with one hand and Rear Frame with other hand and
slowly pull together.
7. For unit to store flat, you must fold Handlebars in. Loosen Handlebar Knobs
and turn Handlebars inward toward unit and tighten Knobs to keep in
place.
NOTE: Before using unit, be sure Handlebars are back in correct position
and Knobs are tightened.
IMPORTANT:
Place hands on
Caution
Labels
when folding and
be careful not to pinch
your fingers between the
Front and Rear Frames.
FIGURE 1
Always review these instructions prior to folding unit.
