27
Make sure that the recorder paper is installed in the center of the recorder, and the paper edge is
parallel with the casing edge in the direction of paper, in order to avoid paper deviation or damage
to the paper edge.
Loading Z-fold paper:
1)
Press the casing button and take out the paper roller
2)
Put the paper in the paper tray
3)
Pull the paper out, the grid side face to the thermal printer head, and close the casing cover.
4)
Select Folding paper.
Turn on the machine, press F6 Setup to access to System setup. Select 1 Print setup, select
Folding paper and confirm.
5)
Advance the recorder paper.
After folding paper is selected, press
to advance the paper to next black marker. It will
stop advance paper automatically once the next paper marker is detected by the thermal printer.
Press “Start/Stop” key to print the ECG report.
If the hint information of no paper showed on display, it indicates the paper is run out or not well
installed. The machine won’t record until the paper is re-stalled according the installation steps
above.
5 Operation Instructions
5.1 Startup with the Mains Supply
When power cord and grounding cable are well connected, and the AC supply indicator is lit. Press
“ON/OFF” key (about 3 seconds) and wait about 15 seconds for system initialization. After the
ECG beeps and starts working, the ECG is ready for operation.
Summary of Contents for EM-1203
Page 2: ...2...
