ECG VT 3620 2in1 Jean, Instruction Manual

Page: 11 / 136

English English
11
Combination nozzle 2 in 1 and small motorised turbo brush
These attachments are suitable for cleaning small, narrow or irregular surfaces such as corners, windowsills,
appliance interiors, drawers, keyboards, etc.
These accessories may not be included - depending on the model purchased.
MAINTENANCE AND CLEANING
We recommend regular maintenance to maximize performance and extend the life of your vacuum cleaner.
Maintenance of the vacuum cleaner body
• Switch off the vacuum cleaner before cleaning.
• Clean parts of the vacuum cleaner with water or a neutral detergent, avoid electrical parts and contacts.
Before cleaning, make sure the cloth is wrung out and prevent water from entering the interior of the
vacuum cleaner.
• After cleaning, do not place the appliance in direct sunlight or in damp places.
Dust container and filter
The dust container is transparent. Please pay close attention to how much dust is in the container and how
clogged the filter is. Regular cleaning ensures product’s performance.
Cleaning of the dust container
The MAX line is marked on the container, which indicates the maximum capacity of the vacuumed dust.
As soon as the amount dust comes close or reaches the MAX mark, empty the container immediately. We
recommend removing the suction tube and other components for easier cleaning.
Cleaning of the removable brush for fine dust
Find the lock on the left side of the floor brush and open it. Pull out the
brush and remove any trapped hair or lint using the scissors or cleaning
brush included in the package.
Cleaning the filter
To maintain the best performance of the appliance, we recommend
cleaning the filter every week and rinse it at least once a month and let it
dry completely. Tips: 6 steps to clean your set of filters
1. Open the dust container lid by pressing the button.
2. Turn the filter cover counterclockwise and pull it out downwards.
3. Turn the filter insert counterclockwise and separate it from the
container.
4. Wash the filter cover and filter insert under running water.
5. Attach the filter cartridge to the dust container by turning it clockwise
(make sure the filter cartridge is thoroughly dry before putting it back in).
6. Attach the filter cover to the dust container by turning it clockwise (also make sure the cover is thoroughly
dry).
Cleaning the motorized floor brush
We recommend cleaning the brush after each use.
1. Turn off power
2. Remove the motorized floor brush.
3. Pull the removable rotating brush out of the brush.
4. Clean all parts from dirt and any trapped hair, animal hair.
5. Place the rotary brush back into the floor brush.
Using the cleaning brush
The sharp end can be used to cut off hair caught in the rotary brush. The opposite end is used for cleaning the
dust container, filter insert or suction tube.