32
EN
Sprinkling
Press the sprinkling button to dampen hard to remove creases.
OTHER FUNCTIONS
ANTI-CALC system
A special fi lter made of synthetic resin inside the reservoir softens water and reduces the risk of scale. The
resin fi lter is an integral part of the water reservoir and does not need replacing.
ANTI-DRIP system
This function prevents water escaping from the soleplate when the temperature is too low. This system
enables you to perfectly iron even the fi nest of fabrics.
The iron can cool down to a temperature at which the steam process is not carried out, however, drops of
boiling water can cause stains. The anti-drip system is automatically activated in cases like this, preventing
the vaporization process so you can iron even the fi nest of fabrics without the risk of staining or damaging
them.
AUTO-SHUT OFF system
This safety function allows the appliance to automatically switch off in case it sits horizontally on the ironing
surface without movement for 30 seconds or 8 minutes if idle in the vertical position. In these situations, the
appliance will switch off automatically, an interrupted noise will sound and the backlight will change from
red to green. As soon as you move the iron, it will automatically switch back on and you may continue using
the appliance.
Note:
This only purpose of this function is to ensure safety. The standard method of switching off the
appliance is to set the temperature control to minimum and unplug the appliance from the electrical
outlet.
Auto-clean
The auto-clean function removes impurities from the steam chamber and limestone from the soleplate. We
recommend using this function every 10-15 hours of ironing.
1.
Fill the reservoir with water until the line marked max. is reached and set the steam control to maximum.
Set the temperature control to maximum temperature and wait until the indicator light goes out.
2. Pull out the plug from the electrical outlet and tilt the iron horizontally over a sink.
3. Hold the iron horizontally above the sink and hold the steam control in the “autoclean” position until the
boiling water is released and all impurities are drained.
4. Use a moist dish towel to clean the soleplate after the iron has cooled.
CLEANING AND MAINTENANCE
Disconnect the appliance from the electrical output prior to performing any maintenance. Cleaning shall
always be performed on a cooled appliance!
Remove any sediments, starch residue or softener using a moist (or wet) dish towel or a fi ne liquid cleaning
agent and dry with soft dry fabric. Using wire wool or metal objects can scratch the soleplate. Never clean the
iron under running water, do not rinse or immerse the iron into water!
Always make sure the steam iron is completely cooled, clean and dry before putting it away. Store the iron
in an upright position.