![background image](http://html.mh-extra.com/html/ecg/nz-221/nz-221_user-manual_531101029.webp)
EN
28
Ironing with the steam burst
To iron out hard to remove creases with a strong steam burst slowly (thick diffusion) or quickly (fine dif-
fusion) press the steam burst button [pic. 6].
For fi ne fabrics we recommend that the fabrics are dampened or that a damp wiping cloth is placed
between the iron and the fabric before using the diffusion function (4). To prevent stains from forming,
do not use the diffuser on silk or synthetics.
Vertical steam burst
To iron or straighten crumpled hanging drapes, curtains, clothes etc. hold the iron in vertical position and
press the steam burst button. Before pressing again, wait a few seconds [pic. 5].
The steam burst function can only be used at high temperature. As soon as the temperature indicator
light of the ironing plate turns on, stop using the steam. Start ironing again only when the indicator
light turns off.
Attention:
Never direct the steam burst at people or animals.
Automatic steam emission function
To set the emission of steam corresponding to the temperature of the ironing surface, turn the steam
regulator to the on position.
Sprinkling function
After dampening hard to remove creases press the sprinkling function.
OTHER FUNCTIONS
Dcalcification system ANTI-CALC
A special fi lter from synthetic resin inside the tank softens the water and thereby prevents the creation
of scale deposits. The resin fi lter is permanent and does not need to be replaced.
System ANTI-DRIP
This function prevents water from leaking out of the ironing surface when the temperature is too low.
Thanks to this system you can perfectly iron even the fi nest fabrics.
The iron may cool down to a temperature where steam is no longer being create, but drops of hot water
can cause stains on the laundry. In such cases the anti drip system is automatically activated, preventing
dripping, so you may iron even the fi nest fabrics without the risk of stains or damaging them.
Self cleaning
The self cleaning function removes dirt particles from the steam chamber and scale from the ironing
surface. We recommend that you use this function for every 10-15 hours of ironing.
1. Fill the tank all the way up to the maximum level mark and set the steam regulator to maximum. Set
the temperature regulator to maximum temperature and wait until the indicator light turns off.
2. Pull out the power cord plug from the power socket and above the sink turn the iron to the horizon-
tal position.
3. Hold down the self cleaning button until the boiling water evaporates and all dirtiness is washed
out.
4. After the iron has cooled down you can clean the ironing surface using a damp wiping cloth.
Summary of Contents for NZ 221
