EN
30
EN
31
Children lockout
When you press the children safety button you will switch on the control panel lockout. The indicator
light will come on and the lock is set. When the lock is set, none of the buttons on the control panel
work, except for the on/off button . To cancel the children lockout, press the children safety button
for at least 3 seconds, the light will go out and the function is cancelled.
WARNINGS
If there is something wrong, a beep will sound and a code will appear on the display:
E1
– there is no pot/pan on the induction zone or the diameter of the pot/pan is smaller than 12 cm
E2
– protection of the IGBT (component of the heating element) from overheating
E3
– the voltage is higher than 265 V
E4
– the voltage is lower than 160 V
E5
– short circuit of the temperature sensor
E6
– short circuit of the IGBT
E7
– Protection of the temperature sensor from overheating
CLEANING AND MAINTENANCE
Before cleaning or any other handling of the induction hotplate pull out the plug of the power cord
from the power socket and allow the hotplate to cool down!
While the hotplate is cooling down keep it out of reach of children!
After it has cooled down clean the glass ceramic surface and the control panel with a cloth and for dirty
areas use a slightly damp cloth dipped in dish washing detergent.
Do not use abrasive sponges or cleaning powders. Neither the induction hotplate nor the power cord
may be submerged in water!
Keep the surface of the hotplate clean at all times to prevent the accumulation of dirty materials in the
area of the fans and its subsequent malfunction. To wipe dust from the air inflow and outflow areas
use cotton buds or a toothbrush with a small amount of cleaning agent, which is not aggressive and
carefully remove oil stains.
Carefully wipe away remains of cleaning agents from the hotplate using a damp cloth, otherwise then
may burn to the hotplate when it is turned on.
TROUBLESHOOTING
If while using the induction hotplate you discover a problem, please read the following information
before contacting a service centre: