ECG HH 2010, Instruction Manual

Page: 7 / 68

English English
7
individuals that are not capable of leaving the room without assistance,
unless proper supervision is available.
WARNING:
Use the device always only in the upright position (base on
the bottom, controls at the top). Any other position is dangerous.
Do not immerse in water! – Do not immerse in water!
The surfaces marked in this way become hot during use.
Risk of burns!
DO NOT COVER! Danger of fire.
DANGER for children:
Children may not play with the
packaging material. Do not let children play
with the plastic bags. Risk of suffocation.
Installation requirements
Place the radiator on a flat surface that provides sufficient free space
for proper venting. There must be a distance of at least 1 m between
the device and surrounding objects. The heater must not be operated
without the bases fitted.
USING THE APPLIANCE
Note:
When first switched on or switched on after a long period of inactivity, the heaters may emit odor or
smoke. This is normal and it will fade away in a short while.
This device uses convection heating technology with temperature control. It is equipped with the function
TURBO (use of heating together with a fan) Thermostat control (A) is used to regulate temperature. Turn the
power control to set the required level:
Switch the unit on with the B control and select the desired function (fan without heating, low or high power).
To heat the room faster, we recommend setting the thermostat to maximum and the dial to high power. Once
you reach the desired temperature, turn the thermostat counter-clockwise until the thermostat shuts off. This
sets the temperature that the device will automatically maintain until you switch it off.
Any manipulation of the device can only be performed if it is switched off with the main switch and
disconnected from the electrical outlet.
Turning the appliance off
First, set the thermostat control to position „MIN" and switch to position "0". Then always unplug the power
cord from the outlet!
Any handling of the device can only be performed if the switches are off and it is disconnected from the
electrical outlet.