GB
54
Delayed start
Press the
button
of delayed start
6
to set the time when the program should start. The display shows the
time, which you can change by repeatedly pressing the button
6
.
Child lock
The washing machine is equipped with child lock function, which prevents change to the currently run
program by an unintended pressing of a button or by turning the control knob.
•
When the washing machine is running press for at least 3 seconds the
button
delayed start
and the
button for additional function selection
. A child lock is activated and the washing machine settings can
not be changed now, all but buttons except the power switch are inactive. To deactivate the child lock,
press and hold the above buttons again.
•
If you want to change the washing program during the active child lock, deactivate the child lock fi rst
and restart the washing machine so that a new program can be selected. If you want to change the
temperature or the spin, deactivate the child lock, press
Start/Pause
and then change the temperature
or the spin setting.
Automatic door lock
When a program is selected, the washing machine door are automatically locked. Release the lock two minutes
after the program ends.
CLEANING AND MAINTENANCE
•
Unplug the machine before maintenance or cleaning.
•
Close the water tap before starting maintenance or cleaning.
Warning:
If you use cleaners containing solvents, you could damage
parts of the washing machine. Do not use cleaners containing
solvents for cleaning.
Filters for water supply
The inlet hose is equipped with fi lters at both ends to prevent the foreign
matter from entering the washing machine.
If the washing machine does not receive suffi
cient water although your
water tap is opened, these fi lters should be cleaned. (We recommend
cleaning the fi lters once in six months)
•
Disconnect the water supply hose.
•
Clean the hose inlet at the tap.
•
Remove the fi lter on the inlet valve side and clean thoroughly with a brush.
•
After cleaning, return the fi lters back the same way.
Warning:
Dirty intake water or inadequate maintenance can cause clogging or damage to the supply valves
and following continuous water fl ow into the washing machine. Malfunctions due to these reasons
are beyond the scope of the warranty.
Pump fi lter
The pump fi lter system prevents penetration of textile fi bres and small items from the drained water into the
pump and extends its service life. We recommend that you clean the pump fi lter once a month.
Pump fi lter cleaning:
1. Open the door of the pump fi lter (note: if there is hot water in the washing machine wait until it cools
down.)
2. Turn counter-clockwise to remove the fi lter from the washing machine.
3. Rinse the fi lter thoroughly.
4. Replace the fi lter and tighten it by turning clockwise. Then close the pump fi lter door.
Notes: