![background image](http://html1.mh-extra.com/html/ecg/etf-90-heat-blackline/etf-90-heat-blackline_instruction-manual_3887613023.webp)
English
English
23
AUTOMATIC MALFUNCTION ALERTS AND WHAT TO DO
Your tumble dryer is equipped with a built-in malfunctions detection system, which are indicated by a
combination of flashing operating lights. The most common error codes are listed below.
Error code
Solution
E00
Contact your nearest authorized service representative.
E03 /
Empty the water tank, if the problem persists, contact your nearest
authorized service representative.
E04
Contact your nearest authorized service representative.
E05
Contact your nearest authorized service representative.
E06
Contact your nearest authorized service representative.
E07
Contact your nearest authorized service representative.
E08
There may be voltage fluctuations in the power supply. In this case, wait
until the voltage value returns to the operating range.
Energy efficiency
•
You should use the dryer at full power, but make sure it is not overloaded.
•
When washing clothes, the spin speed should be as high as possible. This reduces drying time and reduces
power consumption.
•
Make sure the same types of laundry are dried together.
•
When selecting a program, follow the recommendations in the instruction manual.
•
Leave a suitable gap on the front and back of the dryer for air circulation. Do not cover the grilles on the
front of the appliance.
•
If it is not necessary, do not open the dryer door during drying. If you have to open the door, do not leave
it open too long.
•
Do not add new (wet) laundry during the drying run.
•
The hairs and fibres that separate from the laundry and merge in the air are collected using the “Textile
Fibre Filters”. Make sure the filters are cleaned before and after each use.
•
For heat pump models, make sure the heat pump is cleaned at least once a month or after every 30 uses.
•
The environment in which the dryer is installed must be well ventilated during drying.
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product. Recycling contributes to
preserving natural resources. For more information on the recycling of this product, refer to your local authority,
domestic waste processing organization or store, where you purchased the product.
This product complies with EU directives on electromagnetic compatibility and electrical safety.
The operating manual is available on internet at www.ecg-electro.eu.
Changes of text and technical parameters reserved.
08/05