![background image](http://html1.mh-extra.com/html/ecg/etf-90-heat-blackline/etf-90-heat-blackline_instruction-manual_3887613014.webp)
English
English
14
Energy consumption values
Programme
Maximum
capacity (kg) RPM speed/min.
Approximate
amount of residual
moisture %
Energy
consumption
(kWh)
Cotton to Closet
9
1000
60
2.12
Cotton for ironing
9
1000
60
1.86
Synthetics for the closet
4.5
800
40
0.98
Energy consumption in the “Off” mode P
O
(W)
0.5
Energy consumption in the “On” mode P
L
(W)
1
The “Cotton to Closet” program used at full and partial load is the standard drying program
for which information on the label and information sheet is relevant. This program is the most
energy efficient program for drying normal wet cotton laundry.
* Energy label standard program (EN 61121: 2013)
All values in the table have been determined in accordance with EN 61121: 2013. Consumption values may
differ from the values in the table depending on the type of fabric, the method of spinning, ambient conditions
and variations in voltage.
Additional functions
The table below summarizes the options that can be selected in the programs is provided below.
Option
Description
Gentle drying
Delicate fabrics are dried for a longer period of time at a low temperature.
Drying level
The humidity obtained after drying can be increased up to 3 levels above the
standard setting. In this way, the desired level of residual moisture can be selected.
Once selected, the corresponding drying level indicator lights up - 1,2 or 3.
Anti-wrinkle
If you select "Easy ironing" and do not open the dryer door when the programme is
finished, the 1 hour anti-wrinkle phase will be extended to 2 hours. After selecting
a programme, an audible alert will sound. To cancel this option, press the same
button again. If you open the appliance door or press the Start/Pause button
during the wrinkle protection phase, the programme will be cancelled.
Delayed start
You can delay the start time of the selected programme by 1 to 23 hours. The
desired delayed start time can be activated by pressing the Start/Pause button.
After the set time has elapsed, the selected programme will start automatically.
During the delay period, options compatible with the program can be activated/
deactivated. By holding down the "Delayed start" button you can change the delay
time repeatedly.
Cancelling the sound
alert
Cancels all sound signals (when turning the programme selection knob, button
sounds and end of programme notifications). To cancel the audible alert, press the
number.5" button for 3 seconds. When you press the button, you will hear a sound
alert that this option is cancelled. Press button 5 again for 3 seconds to resume the
audio signals.
Drying time
If the programme selector is set to “Drying time”, you can extend or shorten the
programme using the “Drying time” button.