ECG EDS 6006 QXA++, Instruction Manual

Page: 103 / 116

GB
103 103
103
New powder detergents usually do not contain phosphates. For this reason there is not water softening by
phosphates. In this case it is recommend to fi ll the salt container, even if the water hardness is only 6°dH. When
using phosphate-free detergent with hard water, on the dishes and glass often appear white spots. In this case
you can achieve better results, when you add larger amount of detergent. Chlorine-free detergents bleach
less. Dark coloured stains may not be removed completely. In this case, run a program with higher working
temperature.
Using the “3 in 1” tablets
General recommendations
These products are detergents with integrated rinse aid and softener (salt).
1. You should make sure prior to using these products that the hardness of your water allows the use of the
tablets (see the recommendation of the manufacturer on the product package).
2. These products should be used exactly according to the manufacturer’s instructions.
3. If you would encounter problems when using “3 in 1” the fi rst time, contact the customer support of the
manufacturer.
Special recommendation
• When using combined products, the rinse aid and the softener are not eff ective. It could be useful to set
the lowest possible water hardness.
Selecting the “3in1” function
1. Press the power button of the dishwasher to switch it on and select the 3in1 wash program (press the 3in1
function button so that the relevant indicator starts fl ashing).
2. Press Start/Pause to start the program 3in1. The indicator 3in1 will be on.
Cancelling the “3in1” function
Proceed according to instructions “Cancelling an active program”. If you decide to use a standard washing
detergent, we recommend:
1. Refi ll the salt and rinse aid dispensers.
2. Change the water hardness setting to the highest possible degree and run three ECO washing cycles
without dishes.
3. Pre-set the water hardness back according to the hardness of your water.
Note: The washing cycle “3in1” is an additional function and has to be used together with another washing
program (Intensive, ECO, light).
FILING THE DISHWASHER BASKETS
You will achieve the best cleaning results if you follow these instructions. The function and the appearance of
the baskets can vary according to the model of the dishwasher.
Loading and unloading dishes from the basket
• Remove larger food leftovers from the dishes. Let the pans with burnt leftovers soak. It is not necessary to
pre -rinse the dishes under running water.
• Load the objects in the dishwasher as follows:
– Objects such as cups, glasses, pots, bowls, etc. put in bottom up.
– Lay diagonally the dishes curved or arched portions to allow water to run out.
– Arrange all the object so that they cannot be overturned.
– Arrange all objects so that the spray arms can move freely.
• You should not put very small objects in the dishwasher; they could fall through the basket.
• When loading the dishwasher, the bottom and the upper basket should not be pulled out simultaneously
to prevent overturning.
Unloading dishes from the dishwasher
We suggest that you empty the lower basket fi rst and then the top, you avoid dripping water from the upper
basket to the bottom.