26
EN
OPERATING INSTRUCTIONS
Before using the product for the fi rst time, remove all packaging material and place the device away from
children to ensure their safety against potential suff ocation or inhalation.
1. Open the container (fi g. 1) and fi ll with the required liquid soap or gel disinfection up to the MAX line,
close the container. Do not overfi ll the container, this may lead to spontaneous dripping.
Fig. 1
Note:
Cleaning agents may also be used as fi lling. Its density, however, is lower meaning the device will
release after 3-4 hand movements by the detection sensor (you will always hear the dispenser
motor running but no liquid being released). This cycle is repeated when the device is not used for a
longer period of time. After the fi rst dose, repeated doses will be carried out normally, for each hand
movement by the detection sensor. We recommend setting the dose level to medium or large.
2. Remove the battery cover by sliding away from the device and insert 3× AA batteries with proper polarity
+/-, then place the cover back to its position. The LCD display shows the current “BATTERY LEVEL” (fi g. 2).
Fig. 2
3. Place the magnetic part of the removable drip tray towards the device under the detection sensor.
4. Place hands under nozzle.
5.
The infrared sensor activates the dispenser, providing the given amount of liquid, which you can increase/
reduce using the +/- buttons. The selected level will be displayed on the LCD display as “DISPENSE
AMOUNT” (fi g. 3). The dispensing function is deactivated when the dispense amount is set to “POWER
OFF” (fi g. 4).
Fig. 3
Fig. 4
CAUTION!
Set the dispenser to “POWER OFF” before refi lling, cleaning or changing batteries.
Refi lling
The LCD displays the “LIQUID LEVEL” (fi g. 5), if only the last segment is displayed, refi ll the liquid.
