![background image](http://html.mh-extra.com/html/ecg/24-hs01t2s2/24-hs01t2s2_instruction-manual_531279025.webp)
English
English
24
25
22 kHz
Depending on the multiswitch or LNB used, you can select the following for modulating the LNB supply
voltage with a frequency of 22 kHz:
Auto / On / Off
.
Tone burst
Depending on the satellite switch used, you can select:
None
/
BurstA
/
BurstB
.
DiSEqC 1.0 (Digital Satellite Equipment Control)
In DiSEqC 1.0 mode, you can switch between four signal sources, i.e. LNB 1 to LNB 4, depending on the
configuration of the multiswitch or antennas.
DiSEqC 1.1
In DiSEqC 1.1 mode, you can switch between sixteen signal sources, i.e. LNB 1 to LNB 16, depending on the
configuration of the multiswitch or antennas.
Motor
Select DiSEqC1.2 or DiSEqC1.3 to control the motor to rotate the antenna. To enter the submenu for setting
limits and geographical position, press the green or yellow button. Then use the buttons
vV
b
B
to move in
the menu and to set parameters.
Single Cable
Settings when using Single Cable technology, which allows multiple receivers to be powered by a satellite
signal using a single cable. Use the buttons
vV
b
B
to select and set parameters.
5. Press
BACK
to return to the previous menu. Press
EXIT
to exit menu.
Signal information (in DTV mode)
Allows you to view more detailed information about the signal of the currently received program / multiplex.
1. Press
to enter the main OSD menu.
2. Use
vV
buttons to select the menu
TV programs
and press
OK
.
3. Use
vV
buttons to select the menu
Signal information
and confirm by pressing
OK
.
4. Press
BACK
to return to the previous menu. Press
EXIT
to exit menu.
Common Interface (in DTV mode)
The TV is equipped with a Common Interface (CI) for using a conditional access module (CAM) for pay TV. These
services are offered, for example, by satellite or cable operators. You can obtain suitable CA modules and smart
cards from the relevant service provider.
Procedure for inserting the module into the CI slot
Before inserting the CA module into the TV, make sure that the appropriate Smart Card has been inserted
correctly in the module and the receiver is turned off. Turn the CA module front face (printed) away from the
TV and carefully insert it into the CI slot until you feel a slight resistance. Turn on the TV.
Information about the CI interface
1. Press
to enter the main OSD menu.
2. Use
vV
buttons to select menu
TV programs
and press
OK
.
3. Use
vV
buttons to select the menu
Information about CI Interface
and press
OK
. In this menu item you
can display information about the used CA module or enter its menu and operate other functions.
Network setup
In this item it is possible to make detailed settings of data network connection parameters and to change
settings in case of problems.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 25
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 25
19.08.2020 17:19:19
19.08.2020 17:19:19