ECG 24 HS01T2S2, Instruction Manual

Page: 16 / 148

English English
16 17
1. Press to enter the main OSD menu.
2. Press OK to confirm the first item Picture .
3. Use vV buttons to select one of the picture setting options and press
OK
to confirm. Use b B buttons to
change the setting of each parameter.
Display mode
It allows you to switch between the following picture modes: Standard / Film / User / Dynamic .
Contrast
It sets the differences of brightness between the lightest and darkest areas of the picture (only in the
User
mode).
Brightness
Increases or decreases the level of white in the picture (only in the User mode).
Colour
Sets the color saturation of the picture (only in the
User
mode.
Sharpness
Sets the sharpness of the picture (only in the
User
mode).
Colour Tint (NTSC)
Tone balance between red and green (only when receiving an analog TV signal in the NTSC color system in
User mode).
Backlight
Setting the backlight intensity of the TV display. It affects the brightness and contrast of the picture and the
power consumption of the TV.
Colour temperature
Select one of the presets of the picture color temperature:
Standard
/
Warm
/
Cold
.
Aspect Ratio
Allows you to adjust the aspect ratio of the image:
16:9
/
Film
/
Subtitles
/
Auto
/
4:3
. Depending on the
selected signal source, different aspect ratio settings are available.
Noise reduction
Selection of the picture noise reduction ratio:
Off
/
Low
/
Medium
/
High
/
Auto
.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 16 Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 16 19.08.2020 17:19:18 19.08.2020 17:19:18