- 41 -
ECCO Finishing AB (the “Company”) shall provide the original purchaser (the “Purchaser”) with
warranty service against defects in material or workmanship for a period of one (1) year from the
date of purchase of the product, as follows:
Should you find defects in material or workmanship with regard to parts, ship them back to the
Company, freight prepaid. The Company shall repair or replace the parts free of charge and
reimburse the freight charges, provided that, as a result of an inspection and investigation of the
parts conducted by the Company, the defects are deemed to be to attributable to the factors
within the Company’s responsibility.
When, on the other hand, defects are found, as a result of inspection and investigation
conducted by the Company, to be attributable to natural wear, corrosion, negligence, accidents,
an act of God, installation contrary to the Company’s instructions, abusive use or misuse,
operation contrary to the instructions appearing in the manual, or unauthorized modification, this
warranty shall not apply. Neither shall it apply to any services that are conducted outside
Japan. In these circumstances, any costs that may be incurred on repair or freight shall be the
responsibility of the Purchaser.
In the event also of failure caused by use in conjunction with a hose or a gun, etc. of a maker not
approved by the Company, the warranty does not apply. In these circumstances, the Company
will submit a quotation for the costs of whatever corrective measures are necessary, repair or
replacement, including relevant terms and conditions.
As for items such as parts purchased by the Company from another manufacturer, the warranty
of that manufacturer shall apply.
As for any parts deemed to be defective, the Company shall not be held liable for any expenses
beyond the provision of replacement parts free of charge.
The Company shall not be held liable for any damage to the Purchaser caused by factors not
attributable to the Company, such as misuse of product, etc.
When a transfer of title of this equipment takes place, please see to it that this Operation and
Maintenance
Manual is handed over to the new owner.
This equipment is manufactured in compliance with the Laws and Regulations of Europe.
In the rare eventuality of this equipment being used outside Europe, compliance with the safety
standards of the relevant countries is of course mandatory.
15
Scope of warranty
