Page 11 of 20
Emergency Mode Flash Pattern Selection – Synchronized
The seven customizable emergency flash pattern modes each have the option to be synchronized. This condenses the module groups
from Table to front and rear. The default flash sequences are shown below in Table 7.
Module Group Wires - Synchronized
Function Wire Color Module Sequence Group
GRN/WHT
Front
BLU/BLK
Rear
TABLE 8
Level Mode Default Sequence by Group - Synchronized
Module Group
L1
L2
L3
Front
Off
Left/Right
Cycle
Rear
Left/Right
Off
Cycle
L1 + L2
L1 + L3
L2 + L3
L1 + L2 + L3
Front
Left/Right
Left/Right
Left/Right
Left/Right
Rear
Left/Right
Left/Right
Left/Right
Left/Right
TABLE 7
To toggle synchronized groups on or off
1. Power-up the Lightbar and apply +power to a single level mode (see Table 2) in the 16 conductor cable.
2. Momentarily touch the BLK/RED Pattern wire and the RED wire to +power to set the level mode to synchronized. The four corner modules
will turn on each time the lightbar is toggled between unsynchronized and synchronized.
Module Group Flash Sequence - Synchronized
Order Sequence
LED Module Colors
1
Off
Both
2
Left/Right Primary Only
Primary Only
3
Even/Odd Primary Only
Primary Only
4
Left/Right Secondary Only Secondary Only
5
Even/Odd Secondary Only Secondary Only
6
Left/Right Multi-Color
Both
7
Even/Odd Multi-Color
Both
8
Left/Right
Primary with Secondary Pop
9
Even/Odd
Primary with Secondary Pop
10
Left/Right
Primary with Secondary Random
11
Even/Odd
Primary with Secondary Random
12
Cycle
Both
13
All On Multi-Color
Both
14
Left/Right Primary
Primary with Secondary Random
TABLE 9
To change a Module group flash sequence selection:
1. Power-up the lightbar and apply +power to a single level mode (see Table 2) in the 16 conductor cable.
2. Momentarily touch the BLK/RED pattern select wire and the appropriate Module group wire, shown in Table 8, to +power to cycle through
the sequences shown in shown in Table 9.
