678/03.05.23/V2
P a g e
| 18
of 28
Ecco Stove | Foster House | 2 Redditch Road | Studley | B80 7AX | United Kingdom
T
| +44 (0) 1527 857 814
E
W
| www.eccostove.com
For all patents
–
See Addendum
PARTS
A*
LOWER BOTTOM PART
To be placed on level structural hearth, this section must be laid
level and minimum 50 mm from rear wall or if combustible. (The
circular hole at the rear of the appliance must remain plugged with
the
vermiculite plug fitted).
PHOTOGRAPH 1
Position the ‘T’ shaped joint seal/trim
onto the top
horizontal face ready for the next layer to hold in place.
B
GRATE SECTION
This inner section is lowered into Part A and the cast iron grate fitted
within. (No seals are fitted to this part). Ensure it is located on its domed
carbide locating pips by shuffling to bed into place.
Ba. Fit the cast iron grate into the recess within the Silicon Carbide
grate section.
C
LEFT SIDE
This section to be stood firmly onto Part A using the locating pips to
position accurately. Ensure this section neatly holds the joint seal / trim
into place. Shuffle it to bed into its carbide locating pips.
E
BACK SECTION
Aa POSITION TRIM (no trim with trimless models)
Ab Slide the ash can assembly into the opening in the lower
bottom part.
Ac Fit the two smaller cleaning plugs into the holes on the
Front of the lower bottom part.
D RIGHT SIDE
This section to be stood firmly onto Part A using the locating pips
to position accurately. Ensure this section neatly holds the joint
seal/trim into place. Shuffle it to bed onto its carbide locating pips.
