11
To replace the battery, slide open the battery compartment on the bottom of the
case. Remove the old batteries, and install the new batteries. Observe the
correct polarity of the batteries as shown on the bottom of the battery
compartment.
WARRANTY
Electronic Control Concepts warrants the Model 815 X-ray kVp Meter / Exposure
Time Meter from defects in materials and workmanship for a period of 2 years.
There is no warranty on the battery. ECC will replace or repair any Model 815
during the first year after shipment that does not show obvious signs of abuse.
Contact the factory as described below.
SERVICE INFORMATION
If a unit should need calibration or service, please contact the factory by phone or
fax to obtain a Return Materials Repair authorization.
(800)VIP-XRAY or (800)847-9729 Phone
(845)247-9028 Fax
After obtaining an RMR number, ship the unit to:
Electronic Control Concepts
160 Partition Street
Saugerties, NY 12477
