N
P
P
P
P
1
0
0
F
2
P
P
P
P
N
P
P
P
P
N
0 6
5. How to select the Relay for the PUSH BUTTON input.
The
Push Button Input
can activate Relay-1 or Relay-2 according to the function that was chosen for the relay.
The factory default setting for the Push Button Input is to activate RELAY-1 according to the function chosen.
You can change this setting by SMS command as follows:
The letters “ PPPP ” represent the 4 digit PASSWORD.
The letter “ N “ represents the numbers 1 or 2 for Relay-1 or Relay-2 accordingly.
The unit will send confirmation SMS to confirm
.
6. How to choose the Relays’ function; Pulse or Latch
For each one of the relays 1 and 2 you can choose one of the following two functions;
MOMENTARY (PULSE) or LATCH function (ON / OFF).
The factory default setting for both the relays is a MOMENTARY function (with a 4 second PULSE).
You can change the sending the SMS command as follows:
The letters “ PPPP ” represent the 4 digit PASSWORD.
The letter “ N “ represents the Number 1 or 2 for Relay-1 or Relay-2.
The letter “ F “ represents the FUNCTION, 1 for Momentary or 2 for Latch.
The unit will confirm by SMS message to the sender accordingly
.
7. How to set the Relays’ PULSE time interval
For each one of the relays 1 or 2 you can choose the time interval of the pulse, for the momentary function.
The factory default setting for both the relays is a 4 second PULSE.
You can choose the TIME interval for each one of the relays by SMS command as follows:
The letters “ PPPP ” represent the 4 digit PASSWARD.
The letter “ N “ represents the Number 1 or 2 for Relay-1 or Relay-2.
The letter “ T “ represents the PULSE time:
Enter: 0 => for ½ a second pulse time.
Enter: 1 => for 1 second pulse time. (Factory Default for Relay 2).
Enter: 2 => for 2 second pulse time.
Enter: 3 => for 3 second pulse time.
Enter: 4 => for 4 second pulse time. (Factory Default for Relay 1).
Enter: 5 => for 5 second pulse time.
Enter: 6 => for 6 second pulse time.
Enter: 7 => for 7 second pulse time.
Enter: 8 => for
10
second pulse time.
Enter: 9 => for
15
second pulse time.
The unit will send confirmation SMS to confirm accordingly.
8. To Lock & Unlock the unit;
The unit can be LOCKED so that it will not operate or make any calls and announce “wrong command” for any attempt
to make a call or open the gate.
To LOCK or UNLOCK the unit send the following SMS command:
The letters “ PPPP ” represent the 4 digit PASSWORD.
The letter “ N ” represent “ 1 “ for LOCK and “ 2 “ for UNLOCK.
The unit will confirm by SMS to the sender that says: “
The system is locked
” or “
The system is unlocked
“ accordingly.
