background image

EC-80320 User’s Manual 

- 7 - 

Auto-install way 

Double click the file “Setup.exe” in the driver disc, install driver by the following direct. 

Hand operated installing way 

1) The installing steps for Windows 2000/XP are as follows: 

1. Click “Start” -->"Settings", select “Printers”. 

 

2. Click “Add Printer”, then it will show a window of “Add Printer Wizard”, click “Next”, then please 

read the select direct carefully, Such as, select “Local printer” in the "Local or Network Printer" 
window, then click “next”. 

3. Come out a window of “Select the Printer Port”, select a usable port. Such as, select “LPT1: 

printer port”, click “Next”. 

4. Come out a window of “Manufacturers/Printers", click "Have Disk...", click “Next”. 

5. Come out a window of “Install From Disk”. Please according to the operating system 

environment, such as Windows XP operating system you should select the path as follow: 
CD-ROM-“Driver”-“WIN2000(XP-Vista)”, which you can find a file named: EC80320.inf, click 
“Open”, then click “OK” to return to the window of “"Manufacturers/Printers" , click “Next”. 

6. Follow the direct click “Next” gradually till the installation is finished. 
 

2) The installing steps for Windows 7 are as follows: 

1. Click “Start” -->"Settings and Printers”. 

2. Click “Add Printer”, then it will show a window of “Add Printer Wizard”, click “Next”, then please 

read the select direct carefully, Such as, select “Local printer” in the "Local or Network Printer" 
window, then click “next”. 

3. Come out a window of “Select the Printer Port”, select a usable port. Such as, select “LPT1: 

printer port”, click “Next”. 

4. Come out a window of "Manufacturers/Printers", click "Have Disk...", click “Next”. 

5. Come out a window of “Install From Disk”. Please according to the operating system 

environment, such as Windows XP operating system you should select the path as follow: 
CD-ROM-“Driver”-“WIN2000(XP-Vista)”, where you can find a file named: EC80320.inf, click 
“Open”, then click “OK” to return to the window of "Manufacturers/Printers" , click “Next”. 

6. Follow the direct click “Next” gradually till the installation is finished. 

 
Please setup the driver following the setup description in the CD going along with the printer. 
What’s more, you can use the TM-T88II, TM-T88III serials driver from EPSON.   
If you want to cut the paper after printing, please select the “Full cut” or “Partial cut” in the 
Paper/Quality page after clicking the “Printing Preferences” button, which lies in the “General” 
page of the driver properties. Referring figure is shown below. 
It is noted that if paper cut effect is the same whichever you select “full cut” or “partial cut” in the 
driver properties, which means that the cutter (the printer equipped with) can only carry out one 
kind of cut-method.   
 
 
 
 

 

Summary of Contents for EC80320

















































Reviews: