manualshive.com logo in svg

EC Printer EC80320, User Manual

The EC Printer EC80320 is a high-quality printing device designed to deliver exceptional performance. Its user-friendly interface ensures easy operation, and to assist customers, we offer a comprehensive User Manual, available for free download from our website. Explore the full potential of your EC80320 by referring to our detailed manual.

Share
Download
background image

EC-80320 User’s Manual 

- 1 - 

Chapter 1 Introduction 

1.1 Features 

EC80320 printer is a kind of high-speed mini thermal printer. It is a high-quality, high-reliability 

and low-noise POS printer and operated easily, which can be widely used in ECR, PC-POS and 
BANK POS for printing variety of receipt.   

 

1.2 Part Description 

According different data port (interface), EC80320 serials are divided into several different names: 
EC80320 is the printer equipped with parallel interface, EC80320US is equipped with serial 
interface and USB interface, EC80320U is equipped with USB interface and EC80320UE with 
Ethernet interface and USB interface. 
EC80320 serials printer is equipped with auto cutter, It have two kinds of cutter for the consumer 
to selected: partial cutter can only cut the paper with one point left while full cutter cuts the paper 
fully. 

 

 

 

Note: Please contact with the dealer for changing the interface if needed. 

 

1.3 Parts Identification 

 
                                                                                                                               
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

                                                                 

 
 
 
 

 

Parallel interface

 

USB interface

USB + Serial 

interface 

USB + Ethernet 

interface.

 

MODEL 

EC80320 EC80320U 

EC80320US 

EC80320UE 

Cover Open Leve

r 

Power Switch 

Power Indicator (Green) 

Error Indicator (Red) 

Paper out Indicator 

(

Red

) 

FEED Key 

Paper out Tunnel 

(Dentate) Manual Cutter 

Small Cover 

Fig1-1 Main part of the printer

 

Summary of Contents for EC80320

















































Reviews:

No comments

Related manuals for EC80320

DataCard C3000 Datasheet preview
C3000
Brand: DataCard Pages: 2
Samsung SCX-4300 - SCX 4300 B/W Laser Installation Instructions preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 4
Samsung ML-2240 - 23 Ppm Mono Laser Printer Manual preview
ML-2240 - 23 Ppm Mono Laser Printer
Brand: Samsung Pages: 16
Samsung ML 2510 - B/W Laser Printer User Manual preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 170
Samsung CLX-3185FN Manual Del Usuario preview
CLX-3185FN
Brand: Samsung Pages: 165
Xerox 770 System Administration Manual preview
770
Brand: Xerox Pages: 114
DataCard SP35 Plus Quick Install Manual preview
SP35 Plus
Brand: DataCard Pages: 8
DataCard Datacard SP35 Quick Install Manual preview
Datacard SP35
Brand: DataCard Pages: 8
DataCard SD Series Packaging Manual preview
SD Series
Brand: DataCard Pages: 3
Eaton Power Defense PD3 Mounting And Operating Instructions preview
Power Defense PD3
Brand: Eaton Pages: 4
IBM InfoPrint 6500 User Manual preview
InfoPrint 6500
Brand: IBM Pages: 334
IBM 6400 Series Maintenance Manual preview
6400 Series
Brand: IBM Pages: 428
IBM 6400 Series Setup Manual preview
6400 Series
Brand: IBM Pages: 316
IBM 5400-006 Setup Instruction preview
5400-006
Brand: IBM Pages: 210
TierTime UP mini User Manual preview
UP mini
Brand: TierTime Pages: 28
Lexmark C910 Finisher Manual preview
C910 Finisher
Brand: Lexmark Pages: 11
Star mC-Print3 MCP31LB How To Connect preview
mC-Print3 MCP31LB
Brand: Star Pages: 12
Ravas PR-INT-MX-RAVAS-ABLE Manual preview
PR-INT-MX-RAVAS-ABLE
Brand: Ravas Pages: 26

Brands by name

Popular brands

Load more brands