EC Printer EC80320, User Manual

Page: 41 / 48

EC-80320 User’s Manual
- 39 -
FS S Set Chinese character spacing
Format: ASCII: FS S n1 n2
Decimal: 28 83 n1 n2
Hex: 1C 53 n1 n2
Description:
0
≤
n1
≤ 255, 0 ≤
n2
≤ 255 Set the character left-side spacing to n1*(horizontal or vertical motion
unit)
，
right-side spacing to n2*(horizontal or vertical motion unit).
Horizontal or vertical motion unit is specified by GS P command.
FS W Turn quadruple-size mode on/off for Chinese character
Format:
ASCII: FS W n
Decimal: 28 87 n
Hex: 1C 57 n
Description:
0
≤
n
≤ 255
When the LSB of n is 0, turn off the quadruple-size mode.
When the LSB of n is 1, turn on the quadruple-size mode.
FS p n m Print NV bit image
Format: ASCII: FS p n m
Decimal: 28 112 n m
Hex: 1C 70 n m
Description:
1
≤
n
≤ 64 m=0, 1, 2, 3, 48, 49, 50, 51
Prints the NV bit image n using the mode specified by m.
m = 0, 48 Normal mode; m = 1, 49 Double width mode;
m = 2, 50 Double height mode; m = 3, 51 Quadruple mode.
FS q n Define the NV bit image
Format: ASCII: FS q n [xL xH yL yH d1 d2 …dk]1…[xL xH yL yH d1 d2 …dk]
Decimal: 28 113 n [xL xH yL yH d1 d2 …dk]1…[xL xH yL yH d1 d2 …dk]
Hex: 1C 70 n [xL xH yL yH d1 d2 …dk]1…[xL xH yL yH d1 d2 …dk]
Description:
1
≤
n
≤ 64; xH= 0; 0<=xL<=72; yH=0; 0<=yL<=30
k= (xL+xH*256)*(yL+yH*256)*8
The command can define 64 bit images at the same time. All NV images preciously defined are
canceled when new bit image defined. When this command processing, ERROR indicator will
be on for a period time, then the PAPER OUT indicator and ERROR indicator will be both on and
the printer resets. No more other data or commands followed this command, or may cause data
lost or printing mess. The NV image data will be stored in the printer even which is powered off,
and will not lose till this command reprocessed. Excessive use of this function may cause the NV
memory damaged. As a guideline, the command should not be processed more than 10 times
per day.
The hole command including the bit image data should less than 128K bytes (1M bits).
xL,xL specifies (xL+xH*256) bytes in the horizontal direction for the NV bit image you defined.
yL,yH specifies (yL+yH*256) bytes in the vertical direction for the NV bit image you defined.
d specifies the definition data for the NV bit image(column format).