EC-PACK EC-JET 1000Pro Manual Download

Page: 55 / 120

Guangzhou EC-PACK Packaging Equipment Co., Ltd.

EC-JET 1000Pro Continuous Inkjet Printer

beeps twice.

Continuous:

The external alarm will sound continuously while a System Warning is present.

The alarm signal has the following options

Fault

The external alarm will alarm only when printing failure.

Fault or Warning

When a printing failure or system warning occurs, the external alarm will give an

alarm. The system warning type can be set separately according to the user's

needs (such as: low ink, low pressure).

Jet Running

When the JET is running, the external alarm will prompt the alarm.

Printing

When printing is normal, the external alarm will give an alarm.

No Printing

When the printing prohibition alarm is triggered, an external alarm will alarm.Alarm

Warning

6.2

Changing the Installation Setup

6.2.1

Set Time

Printing must be stopped to change this option. Simply enter, in a 24 hour format, the time

require

6.2.2

Set Date

Printing must be stopped to change this option. Simply enter the date required in Day, Month, and Year

order.

6.2.3

Conduit Length

Summary of Contents for EC-JET 1000Pro

























































































































Search results

Summary of Contents for EC-JET 1000Pro

Reviews:

Related manuals for EC-JET 1000Pro

Brands by name

Popular brands

EC-PACK EC-JET 1000Pro, Manual

Search results

Summary of Contents for EC-JET 1000Pro

Reviews:

Related manuals for EC-JET 1000Pro

Brands by name

Popular brands