Chengdu Ebyte Electronic Technology Co,;Ltd E 70-433NW30S user manual
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co,;Ltd 17
（
This instruction is valid for coordinator
only
）
Value
：
0~2
0
：
Input Broadcast(Only the coordinator works)
1
：
Input Short Data (0x0000 0xfff) are broadcast address
2
：
Input Long Data
（
0x000000000000 0xffffffffffffffff
）
are broadcast address
Example
：
AT+TFICFG=0
8
AT+TMCFG
Setting/Querying transport mode configuration (reboot valid)
AT+TMCFG=?
Description:
Gets transport mode configuration
Response
：
TMCFG:0
AT+TMCFG=Value
Description
：
Value
：
0 or 1
0
：
Long Range mode
，
LRM
1
：
Standard transmission mode,GFSK
Example
：
AT+TMCFG=0
Note: The coordinator and node should have the same transmission mode before they can access the network.
9
AT+ PIDCFG
Setting/Querying PANID configuration
（
reboot valid
）
AT+PIDCFG=
？
Description:
Gets PANID configuration
Response
：
PIDCFG:65535
AT+PIDCFG=Value
Description:
Value:0~65535
Example
：
AT+PIDCFG=65535
Note: The node can only join the same network as its PANID (any network can be added when it is configured as 65535)
10
AT+ DMCFG
Setting/Querying dormancy time configuration(reboot valid)
AT+DMCFG=
？
Description:
Gets dormancy time configuration
Response:
DMCFG:0~60
AT+DMCFG=Value
Description: Configure wakeup period of sleep node
Value: dormant time, per unit second (S). 0~60 S.
Note: When configured as 0, the node will never wake up, that is, the node cannot receive
data but can upload data
Example
：
AT+DMCFG=0
11
AT+RSCFG
Setting/Querying the reboot parameter configuration
