background image

Chengdu Ebyte Electronic Technology Co.,Ltd.                                                                                                                                    E31-433T30D User Manual 

 

Copyright ©2012–2019

Chengdu Ebyte Electronic Technology Co.,Ltd.

                                                                                                                                      

13 

 

7.4 Reset instruction 

Instruction format 

Detailed  description 

C4+C4+C4 

In sleep mode (M0=1, M1=1), a command (HEX format) is issued to the module serial  port:: 
C4 C4 C4, the module will generate  a reset; during the reset process, the module performs self-

test, AUX output low level,  After the  completion    of  reset, the AUX outputs high  and  the 
module  starts to  work  normally. At  this  time,  Users  can  switch  modes  or  initiate  the  next 
instruction. 

7.5 Parameter setting instruction 

Name 

Description 

Note 

HEAD 

Fixed 0xC0 or 0xC2, which indicates that this frame data is a 

control command 

M ust be 0xC0 or C2 

C0

The set parameters will be saved after 

power down. 

C2

The set parameters will not be saved 

after power down.

 

ADDH 

High byte of module address (default 00H) 

00H-FFH 

ADDL 

Low byte of module address (default 00H) 

00H-FFH 

  SPED 

Serial  parity bit 

The serial port mode of the two 

communication  parties can be different 

8N1

default

 

8O1 

8 E1 

8N1

equals to 00

 

      TTL Serial  port rate

bps

 

The baud rate of both parties can be 

different.                                                                                                                                                   

The serial port baud rate has nothing to 

do with the wireless transmission 

parameters, and does not affect the 

wireless transmission and reception 

characteristics. 

Serial  port baud rate 1200 

Serial  port baud rate 2400 

Serial  port baud rate 4800 

Serial  port baud rate 9600

default

 

Serial  port baud rate 19200 

Serial  port baud rate 38400 

Serial  port baud rate 57600 

Serial  port baud rate 115200                     

      Wireless air data rate

bps

 

The lower the air speed, the longer  the 

distance, the stronger the anti-

interference  performance and the longer 

the transmission time. 

The wireless transmission rates of both 

communicating  parties must be the same. 

Air data rate 1.2k

default

 

Air data rate 2.4k 

Air data rate 4.8k 

Air data rate 9.6k 

Air data rate 19.2k 

Air data rate 38.4k 

Air data rate 50k 

Air data rate 70k 

CHAN 

Keep and unused 

Write 0. 

Communication channel 

00H-3FH

correspond 425 ~ 450.5M Hz 

Summary of Contents for E31-433T30D





















Reviews: