Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-ZG120A User Manual
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
1
7.2 Quickly join a ZigBee network
（
1
）
Open software “E180-ZG120A-Setting”,choose port number,
and set the serial port baud rate, open the serial port.
（
2
）
After the serial port is opened, first click “Enter Configuration Mode”, the message box prompts “Enter the
configuration status successfully, read parameters successfully”. The main network parameters include: the node type
defaults to the end-device, the channel 11 (default), the PAN ID defaults randomly, and the transmit power is 20. (default)
（
3
）
Modify the node type as sleep-end-device, click the Enter button, the message box prompts "Configure device
type is successful", modify the network parameters, its PAN ID and transmit channel parameters must be the same as the
network to be joined, click "Write network parameters", The message box prompts "Write parameters successfully."
