![background image](http://html1.mh-extra.com/html/ebyte/e18-ms1pa-pcb/e18-ms1pa-pcb_user-manual_3908636010.webp)
Chengdu Ebyte Electronic Technology Co., Ltd. E18-MS1PA1-PCB User Manual
Copyright ©2012–2018
,成都亿佰特电子科技有限公司
9
2)
Change the Beacon Request sending period
Modify the variable zgDefaultStartingScanDuration
// Beacon Order Values
#define BEACON_ORDER_NO_BEACONS 15
#define BEACON_ORDER_4_MINUTES 14 // 245760 milliseconds
#define BEACON_ORDER_2_MINUTES 13 // 122880 milliseconds
#define BEACON_ORDER_1_MINUTE 12 // 61440 milliseconds
#define BEACON_ORDER_31_SECONDS 11 // 30720 milliseconds
#define BEACON_ORDER_15_SECONDS 10 // 15360 MSecs
#define BEACON_ORDER_7_5_SECONDS 9 // 7680 MSecs
#define BEACON_ORDER_4_SECONDS 8 // 3840 MSecs
#define BEACON_ORDER_2_SECONDS 7 // 1920 MSecs
#define BEACON_ORDER_1_SECOND 6 // 960 MSecs
#define BEACON_ORDER_480_MSEC 5
#define BEACON_ORDER_240_MSEC 4
#define BEACON_ORDER_120_MSEC 3
#define BEACON_ORDER_60_MSEC 2
#define BEACON_ORDER_30_MSEC 1
#define BEACON_ORDER_15_MSEC 0
How to put End Device into low power consumption mode, how to set up sleep time?
After
the
POWER_SAVING
is
enabled
in
the
protocol
stack
macro
definition,
put
DRFD_RCVC_ALWAYS_ON=FALSE in f8wConfig.cfg file, then the End Device will enter sleep mode.
The sleep time is decided by the OSAL operating system, the latest Event Timeout to occur will be set as sleep time.
There is description in the protocol stack hal_sleep function.
There are two kinds of timeout: one is the timeout of application layer event, the other is the timeout of MAC layer
event.
1) Timeout of application layer, can be obtained through osal_next_timeout() of osal_pwrmgr_powerconserve(void)
function;
2) Timeout of MAC layer, can be obtained through MAC_PwrNextTimeout() of halSleep(uint16 osal_timeout)
function.
What new features does ZigBee 3.0 stack have?
Please refer to below link, it describes the new features of the ZigBee 3.0 stack as compared with the previous ZigBee
Home Automation/ZigBee Light Link.
http://processors.wiki.ti.com/index.php/What%27s_New_in_ZigBee_3.0
About the status switch in the TI ZigBee protocol stack.
http://www.deyisupport.com/question_answer/wireless_connectivity/zigbee/f/104/t/104629.aspx
About the difference between OAD and OTA in TI protocol stack?