Ebyte E108-GN01, User Manual

Page: 3 / 12

Chengdu Ebyte Electronic Technology Co., Ltd E108-GN01 User Manual
Copyright ©2012–2020
，
Chengdu Ebyte Electronic Technology Co., Ltd
2
1. Product overview
1.1 Production introduction
E108-GN01 is a high-performance, highly integrated, low-power, low-cost
multi-mode satellite positioning and navigation chip. It can be used for GNSS
positioning applications such as car navigation, smart wearable, and drone. It also
provides software and hardware interfaces compatible with other module manufacturers,
which greatly reduces the user's development cycle and supports BDS / GPS /
GLONASS / GALILEO / QZSS / SBAS.
It adopts the integrated design of RF baseband, integrates DC / DC, LDO, RF front-end, low-power application
processor, RAM, Flash storage, RTC, and power management, etc. It supports crystal or external pin clock input. A coin
cell battery or a farad capacitor supplies power to the RTC and backup RAM to reduce the time to first fix. It also
supports multiple ways to connect with other peripherals, such as UART, I2C, SPI or GPIO.
1.2 Features

BDS/GPS/GLONASS/GALILEO/QZSS/SBAS joint positioning and single system independent positioning;

10Hz D-GNSS differential positioning, A-GNSS assisted positioning, ephemeris prediction, DR integrated
navigation application, the fastest data update rate is 10Hz;

32-bit application processor, with a maximum frequency of 133MHz, for dynamic frequency adjustment;

PPS output;

Built-in reset controller;

UART
、
SPI
、
I2C
、
GPIO;

RTC: Support 32.768 KHz ± 20 ppm crystal, 1.1V RTC clock output, support external signal wake-up
；

Output format: NMEA0183 V4.1 and previous versions, the maximum fixed update frequency can reach 10Hz
；

High sensitivity: -149dBm for cold start, -162dBm for hot start, -166dBm for tracking
；

Ultra-low power consumption: capture 30mA, track 20mA;

The software and hardware are compatible with other manufacturers, which greatly reduces the user's development
cycle.
1.3 Application

Vehicle positioning and navigation equipment

Wearable devices, such as GPS trackers;

UAV positioning, industrial computers, etc

Industrial equipment that requires GNSS positioning or navigation.