Chengdu Ebyte Electronic Technology Co.,Ltd.
E103-W02DTU User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
23
b. If the serial port returns the message "Entered AT mode", it indicates that it has entered AT
command mode, otherwise reset and retry the above steps.
⑤
First, set the mode to STA mode.
a. Enter the AT command "AT+ROLE=STA" (please add a line break, i.e. add the Enter key
after entering the command "AT+ROLE=STA") in the Send text box of the serial debug assistant,
and click Send to send the command.
b. If the message "Set STA mode" is displayed on the serial port, it indicates that the STA
mode has been set successfully, otherwise, please operate the above steps again.
⑥
Reset or power down and reboot the WiFi serial server, repeat step
④
.
⑦
Next, we need to enter SmartConfig (one-click configuration) mode.
a. Enter the AT command "AT+SMT=60" in the Send text box of the serial debugging assistant
(please add a line break, i.e. add the Enter key after entering the command "AT+SMT=60") and
click Send to send the command. <The 60 in the AT command here means that the WiFi hotspot
is not connected after 60S, it will time out to exit SmartConfig mode>.
b.. If the message "Enter into Smartconfig" is displayed on the serial port and the STAT
indicator is lit, it indicates that the SmartConfig mode has been entered, otherwise, please retry
the above steps.
