Chengdu Ebyte Electronic Technology Co.,Ltd.
E103-W02DTU User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
21
parameters).
a. Enter the AT command "AT+STA=Ebyte,2,E61TTL1W" in the Send text box of the serial
debugging assistant (please add a newline character, i.e. after entering
"AT+STA=Ebyte,2,E61TTL1W After entering the command "AT+STA=Ebyte,2,E61TTL1W",
add the Enter key and click Send to send the command. <Here you must set the WiFi hotspot
according to the user's location; the "Ebyte" in the previous AT command is the SSID (i.e. WiFi
name) of the WiFi hotspot, '2' is the encryption method WPA2 (if there is no password, the item
is 0), "E61TTL1W" is the WiFi password (if no password, this item is empty)>
b. If the serial port returns "STA update OK" message, it indicates that the STA parameters have
been set successfully, otherwise, please operate the above steps again.
⑦
Reset or power down to restart WiFi serial server, if WiFi serial server is far away from WiFi
serial server, please connect the antenna.
⑧
If the WiFi connection status indicator is on, it indicates that the access to WiFi hotspot is
successful.
