Chengdu Ebyte Electronic Technology Co.,Ltd.
E103-W02DTU User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
22
[WiFi Serial Server as STA (Station) to connect to other WiFi hotspots via SmartConfig
(one-click configuration)]:
①
Connect the factory E103-W02-DTU base board to PC via Micro USB cable.
②
Open the serial debugging assistant "AccessPort" and select the port number; if you are not
sure about the port number, please check in the device manager (see the figure below).
③
Set the serial debug parameters (Baud rate: 115200bps, data bit: 8bit, parity bit: no parity, stop
bit: 1bit). (See the figure below)
④
Next, we enter AT command mode for simple configuration.
<Since we are sending commands, please turn off the Real Time Send function of serial
port for better debugging.
If the serial debugging assistant you are using does not have the Real Time Send function,
please ignore this article>.
a. Start serial debugging, enter the command "+++" in the send text box (please do not add
line break), click Send to start sending commands.
