CPX200NWB ALARM CONTROL UNIT – INSTALLER MANUAL
69 / 118
6.3.4.2.
Partition 1 / 2
The parameter allows assigning particular monitoring partitions to outputs.
6.3.4.3.
Activation time
The parameter defines the time the output is to be active.
6.3.4.4.
Bistable
The parameter allows set bistable mode of the output. In this mode, the output will
be switched on for the duration of the state specified in the "Output Type".
If you set the output type as "unused", the output state can be changed only with
remote command.
6.3.5.
Remote controllers
Configurator allows adding and configuring remote controllers in the same way as it was
done in the Wireless Inputs configuration. In order to add a remote controler, User has to
select a row coressponding to desired remote controller and press the
Add Device button.
New window will appear, where necessary serial port configuration and service code
parameteres have to be filled in. Pressing OK will invoke new window indicating, that
CPX200NWB is waiting for incoming tranmisson from the remote controller. User has to
press one of the controller button, in order to bind it with the Alarm Control Unit. Device’s
