Quick Guide - SBU IO-Link
Page 9 of 10
D)
Storage, packaging and transport
D01
Storage
If you do not install the SBU IO-Link immediately, ensure suitable storage conditions in dry, dust-free, frost-free indoor
rooms protected against sunlight. Wrap the SBU IO-Link in cardboard, plastic or film packaging.
In order to keep the unused SBU IO-Link in a functional condition even over a maximum period of six months, please
observe the following storage conditions:
the storage room should be dry and free from dust.
the storage temperature should be b 5 °C and + 40 °C.
the SBU IO-Link should be stored on a level floor.
the SBU IO-Link should be protected against inadvertent movements and damage.
the SBU IO-Link should be protected against static discharge.
D02
Packaging
The complete SBU IO-Link from EBRO ARMATUREN Gebr. Bröer GmbH is packed safely and fit for purpose in
accordance with the transport route and destination.
D03
Transport in general
Unless agreed otherwise, the SBU IO-Link will be delivered fully factory-preassembled by EBRO ARMATUREN Gebr.
Bröer GmbH.
For the transport, observe the specified weights and dimensions in the delivery documents of the SBU IO-Link .
The SBU IO-Link should be kept in the factory packaging until use or installation. The specified storage conditions
must be adhered to.
On arrival at the destination the completeness of the shipment must be checked
immediately against the shipping documents and packing lists; the intactness of
the shipment must also be checked.
EBRO ARMATUREN Gebr. Bröer GmbH is to be notified immediately in case of
complaints.
INFO
