28
4 Advanced Camera Settings
Click the button “
Settings
”, goes to Administrator Control Panel to make advanced camera settings.
4.1 Status
Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you
various information about your camera.
4.1.1 Device Information
Figure 4.1
Camera Model:
The model of the device.
Camera Name:
The Device Name is a unique name that you can give to your device to help you identify it.
Click
Basic Settings
and go to
Camera name
panel where you can change your camera name. The default
device name is anonymous.
Camera ID:
Display the wired MAC address of your camera. For example Device ID is HJYFC8613P03, the
same MAC ID sticker is found at the bottom of the camera.
Camera Time:
The system time of the device.
Click Basic Settings
and go to
Camera time
panel and adjust
the time.
System Firmware Version:
Display the System Firmware version of your camera.
Application Firmware Version:
Display the application firmware version of your camera.
Plug-in Version:
Display the plug-in version of your camera
4.1.2 Device Status
On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status and so
on.
