24
IPCAM supports 16 preset positions, which is considered enough for DIY home & small business surveillance
market.
The default preset position is TopMost, BottomMost, LeftMost, RightMost, you can add other preset positions.
Add
Click this icon to save the position you need the camera to remember
Delete
Select one preset position and click this button to delete it.
GO
Select one preset position in the preset drop-down list and click Go to make the camera move the
preset position
How to do preset position?
Firstly,
move the camera and stop at a desired place where you want make preset position.
Secondly,
click
button and enter a descriptive name for the preset position. The preset position cannot
contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all
the 16 preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset
drop-down list, and click go
button, the camera will go to the preset position.
Section 6
Guard Position
After setting the guard position, your camcorder will automatically return to the guard position within a
p
redetermined time (manual
ly
setting)
when it
stop
s
moving (manual
ly
or cruise). You
could
refer to the
following method
in
chapter 4.7.4 ( Guard Position Settings).
Section7
IR LED Lights
Click Infra led and t
here are three modes to adjust the infrared led: Auto, Manual and Schedule.
