Ebode IP Vision 58, User Manual, Page: 8 / 77

Manual version 1 – March 2012 8 IP Vision 58
3. Open the “ebode IP Vision Software” map and double click “ IPCamSetup.exe ” then click next to
complete the software installation. (Please note that on some computer systems it might take a few
seconds before the “IPCamSetup” icon will appear)
In order to run smooth we will need to install the “ActiveX App” on each system we would like to use to visit the
camera. The “AppInstall” file is located in the same folder as the “IPCamSetup” file from the previous steps.
Please take the following steps:
4.
ActiveX : Double click “ Appinstall.exe ”—“ Next ”—“ Install ”—“ Finish ”.
Figure 1.5