Ebode IP Vision 58, User Manual, Page: 33 / 77

Manual version 1 – March 2012 33 IP Vision 58
3.2 Network Settings
Click Network , will pop-up the prompt as below:
Figure 5.7
3.3 Basic Network Settings
Here you can fix the camera’s IP address; means set the static IP address of camera manually.
You can also do the same settings from IP Camera Tool. (Figure 2.3)
There are some good reasons to give the camera a static IP. The factory default setting is DHCP, this means
that the network router will give the Camera an IP address itself for easy setup. The problem is that after a
camera or network power loss the router may decide to give the camera a different IP address than the last
time. If you want to login to the camera not using the IP Tool you don`t know the camera`s (new) IP address.
Î
Figure 5.8
If you don’t know Subnet Mask, Gateway, DNS Server. Please check the Local Area Connection Status of
your computer; it contains all these information, steps as below:
1. Control Panel
Î
Network Connections
Î
Local Area Connections
Î
Support
Î
Details